Typo in LPC802 User Manual

drsmith_yorku — Tue, 09 Apr 2019 04:08:33 GMT

Hi,

I have found a typo in the User Manual for the LPC802. The MRT is described as having 4 channels and 24 bits on the timer. It's actually 2 channels and 31 bits.I chekc

I checked the register value of MODCFG in MCUXpresso just to make sure (see NOC and NOB values).

Re: Typo in LPC802 User Manual

ZhangJennie — Tue, 09 Apr 2019 05:07:51 GMT

Hi James.

As documented in user manual MRT is 2 channel 31 bit interrupt timer.

I found the same typo in LPC804 manual. I will report this problem.

Thanks for bringing this two our attention.

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Typo in LPC802 User Manual in LPC Microcontrollers

Typo in LPC802 User Manual

Re: Typo in LPC802 User Manual