topic Debugger probe problem LPC11U68 in LPC Microcontrollers

Debugger probe problem LPC11U68

mohamedshaheen — Thu, 20 Dec 2018 14:26:09 GMT

I am using LPC11U68 eval board to program and debug a off board target processor (LPC11U68).

The debug session does not start and I get the following errors:

MCUXpresso IDE RedlinkMulti Driver v10.2 (Jul 25 2018 11:25:37 - crt_emu_cm_redlink build 555)
Reconnected to existing link server
Connecting to probe 1 core 0:0 (using server started externally) gave 'Ee(42). Could not connect to core.'
Connecting to probe 1 core 0:0 (using server started externally) gave 'Ee(42). Could not connect to core.'
Connecting to probe 1 core 0:0 (using server started externally) gave 'Ee(42). Could not connect to core.'
Server OK but no connection to probe 1 core 0:0 (after 3 attempts) - Ee(42). Could not connect to core.
Failed on connect: Ee(42). Could not connect to core.
No connection to chip's debug port

I saw similar postings but the suggested solutions did not work for me.

The debugger configuration is shown below:

Is there a known solution to this problem?

Thanks!

Re: Debugger probe problem LPC11U68

adamhimer — Mon, 07 Jan 2019 14:47:02 GMT

I am also having the Ee(42) issue on two different LPCXpresso V2 boards on a new PC build.

Re: Debugger probe problem LPC11U68

adamhimer — Mon, 07 Jan 2019 15:55:10 GMT

It seems my solution was disabling the enhanced peripheral service:

Re: Debugger probe problem LPC11U68

mohamedshaheen — Tue, 08 Jan 2019 13:54:28 GMT

Hi Adam,

Thanks the recommendation. I unchecked "Use enhanced peripheral service" but it did not work for me.

I noticed that this error occurs when I power the target board from an external power source (not from the development board)

-Mohamed

Re: Debugger probe problem LPC11U68

Alice_Yang — Thu, 10 Jan 2019 02:31:49 GMT

Hello Mohamed ,

Could you please take a picture to show how connect board?

Also please use the newest MCUXpresso IDE v10.3 to have a try.

Alice