LPC802 I/O protect issue

angusshi — Mon, 09 Jul 2018 02:13:20 GMT

the case is LPC802 A/D 1,2 to measure the battery voltage, but we have not anti reverse connection mechanism in the product. When battery plug in reversed, The A/D pin will be breakdown and the MCU standby current will be increase after this accident.

1. Because same circuit in our old product(Non NXP MCU) is no problem, Could you help to provide I/O internal protection detail circuit ?

2. Need any external protect? Any recommendation to avoid this breakdown?

Re: LPC802 I/O protect issue

jeremyzhou — Tue, 10 Jul 2018 02:54:38 GMT

Hi Angus Shi,
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
1) Because same circuit in our old product(Non NXP MCU) is no problem, Could you help to provide I/O internal protection detail circuit ?
-- Please check the Fig 1.
2. Need any external protect? Any recommendation to avoid this breakdown?
-- To provide the fastest possible support, I'd highly recommend you to refer to the thread for details. http://www.analog.com/en/technical-articles/protecting-adc-inputs.html.
Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

LPC MicrocontrollersのトピックRe: LPC802 I/O protect issue

LPC802 I/O protect issue

Re: LPC802 I/O protect issue