LPC MicrocontrollersのトピックLinux cmd tool to flash LPC546xx https://community.nxp.com/t5/LPC-Microcontrollers/Linux-cmd-tool-to-flash-LPC546xx/m-p/727526#M29426 <HTML><HEAD></HEAD><BODY><P>In the manual it's said that ISP is possible wiht USB, is there a linux commandline tool or so where I can give my .axf file as an argument and program the flash? It's a LPC546xx&nbsp;</P></BODY></HTML> Thu, 22 Mar 2018 08:38:40 GMT arthuraner 2018-03-22T08:38:40Z Linux cmd tool to flash LPC546xx https://community.nxp.com/t5/LPC-Microcontrollers/Linux-cmd-tool-to-flash-LPC546xx/m-p/727526#M29426 <HTML><HEAD></HEAD><BODY><P>In the manual it's said that ISP is possible wiht USB, is there a linux commandline tool or so where I can give my .axf file as an argument and program the flash? It's a LPC546xx&nbsp;</P></BODY></HTML> Thu, 22 Mar 2018 08:38:40 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Linux-cmd-tool-to-flash-LPC546xx/m-p/727526#M29426 arthuraner 2018-03-22T08:38:40Z Re: Linux cmd tool to flash LPC546xx https://community.nxp.com/t5/LPC-Microcontrollers/Linux-cmd-tool-to-flash-LPC546xx/m-p/727527#M29427 <HTML><HEAD></HEAD><BODY><P>Is mass storage boot a viable way for you to work? Then the device will just appear like a mass storage drive; you delete the firmware.bin file you will see there, then replace it with your application, renamed to firmware.bin.</P><P>Not sure why you have to have .axf files ... MCUXpresso IDE will generate a bin file for you automatically - right click on the axf file and select Binary Utilities &gt; Create binary to get it.</P></BODY></HTML> Fri, 23 Mar 2018 18:24:18 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Linux-cmd-tool-to-flash-LPC546xx/m-p/727527#M29427 brendonslade 2018-03-23T18:24:18Z