LPC 4357 10 bit A/D

peterweatherall — Tue, 01 May 2018 18:46:38 GMT

I see an intermittent problem with the LPC 4357 where the 10 bit AD converter does not flag the DONE bit after requesting a conversion under software control (START=1). This only happens in about 1 in 100000 measurements. In between each group of 4 measurements the converter is powered down. Is there any known issue that might cause this.

Re: LPC 4357 10 bit A/D

jeremyzhou — Thu, 03 May 2018 03:25:17 GMT

Hi Peter Weatherall,

Thank you for your interest in NXP Semiconductor products and 

the opportunity to serve you.

I'd like to get more information, such as code flow, testing steps,etc.

Whether you can share.

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic LPC 4357 10 bit A/D in LPC Microcontrollers

LPC 4357 10 bit A/D

Re: LPC 4357 10 bit A/D