ISP over CAN - LPC11C24

trevorroach — Mon, 14 Aug 2017 16:21:19 GMT

Hello all,

I'm working on a project where we would ideally like to be able to flash a program via CAN ISP to an LPC11C24. The documentation provides fairly good guidelines on what to put on the CAN bus line in order to accomplish this, but I am somewhat lost as to how to get the binary file, etc from the PC to the CAN bus. We've considered creating a custom CAN programmer board, but would love to know if there is any NXP hardware/software already available for this purpose?

If there are no NXP/third party solutions available, any further tips/advice would be much appreciated.

Thanks.

Re: ISP over CAN - LPC11C24

soledad — Mon, 14 Aug 2017 20:05:05 GMT

Hi,

I'm afraid there are no such demos to meet your requirement.

However you can learn to form the CAN ISP sequence by checking the following link:

LPC11C24 Can Bootloader Assistance

Programming LPC11C14 firmware via CAN I/F

Program update for LPC11C24 via CAN bootloader from other board(master board consists of LPC11c24)

Have a great day,

Sol

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic ISP over CAN - LPC11C24 in LPC Microcontrollers

ISP over CAN - LPC11C24

Re: ISP over CAN - LPC11C24