LPC Microcontrollers中的主题 Re: Programing LPC-link2 using LPC-link1

Programing LPC-link2 using LPC-link1

christianm — Wed, 24 May 2017 14:11:16 GMT

Hi,

I been trying to program the LPC-link2 (as a eval board to LPC4370) using a LPC-link (JTAG), but without much success. I'm able to debug to device, but not to program the device. I followed different threads such as https://community.nxp.com/message/630848 , but again nothing have worked so far. Does anyone have any advice?

Thank you all in advance,

Christian

Re: Programing LPC-link2 using LPC-link1

christianm — Mon, 29 May 2017 13:01:20 GMT

So, I couldn't find a way to configure my lpc-link to program the external flash of the lpc-link2, but I resolve the programming using the lpcScrypt.

Re: Programing LPC-link2 using LPC-link1

lpcxpresso_supp — Tue, 30 May 2017 11:35:06 GMT

You don't need to configure the LPC-Link. But your LPCXpresso IDE project does need to have the external memory of the LPC4370 on the LPC-Link2 defined in the memory configuration, along with the corrected flash driver associated with it.

For more details see the LPCXpresso IDE User Guide, along with https://community.nxp.com/thread/389076

Regards,

LPCXpresso Support

Re: Programing LPC-link2 using LPC-link1

christianm — Tue, 30 May 2017 12:51:00 GMT

Thank you for your reply. I've tried again, and is working fine now (probably I was failing at the configuration of the jumper JP1)