lpc 811 read part id error

cat96 — Mon, 10 Jul 2017 06:32:52 GMT

Good morning,

I spoke with Brendon Slade and he recommended to open this case:

I'm writing because I have a problem in LPC811 during the Part id read through IPA (SWD) command, other IAP (erase and program) works fine.
This happens only with LPC811 (LPC811M001JDH16), i call the IAP, but the core doesn't halt.

in order i do:

-1- swd_connect return ok

-2- dap inits return ok

-3- read part id(see below) return error in dhcsr :the core doesn't halt

uint32_t Chip_IAP_ReadPID(void)
{
uint32_t command[5], result[5];

command[0] = IAP_REPID_CMD;
iap_entry(command, result);

return result[1];
}

can you help me?

best regards

Matteo

Re: lpc 811 read part id error

kerryzhou — Tue, 11 Jul 2017 07:35:31 GMT

Hello Domenico Catalano,

After check the errata, I find these contents:

http://www.nxp.com/docs/en/errata/ES_LPC81XM.pdf

Because I don't have the LPC811M001JDH16 chip on my side, then I can't test it directly on my side, now please configure FLASHCFG regsiter to 2 system clocks, and try again.

Any updated information, please kindly let me know!

Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: lpc 811 read part id error in LPC Microcontrollers

lpc 811 read part id error

Re: lpc 811 read part id error