topic Re: LPC-link 2 is stopped detected by system in LPC Microcontrollers

LPC-link 2 is stopped detected by system

priyadarshinisi — Thu, 18 May 2017 05:07:34 GMT

Hello,

I am using LPC-Link 2 for debugging my LPC1769 board. It was working fine till now, but suddenly it stopped working.

Here I meant by Stopped working is, now my LPC-link 2 is not detected by my system. I tried a different system, changing com ports and various cable too but still, LPC-link 2 device is not detected by any of the systems. LED1(bootLed) is blinking whenever I connect LPC-Link 2 with USBcable.

Anyone can help in finding what is basically the problem with my LPC-link 2 and how I can fix it.

lpcware‌lpcware-support‌lpcxpresso_support‌

#lpclink2‌ #nxp lpc1769‌

Re: LPC-link 2 is stopped detected by system

lpcxpresso_supp — Tue, 23 May 2017 07:38:21 GMT

Check out : https://community.nxp.com/message/630577

If you still have problems, give details of what you see in see at each stage of the manual boot process in Devices and Printers (assuming you are using Windows).

Regards,

LPCXpresso Support

Re: LPC-link 2 is stopped detected by system

priyadarshinisi — Tue, 23 May 2017 10:28:24 GMT

My LPC-Link 2 is not visible at Devices and Printers.

Re: LPC-link 2 is stopped detected by system

lpcxpresso_supp — Wed, 24 May 2017 09:37:26 GMT

So are you trying to use your LPC-Link2 with LPCXpresso IDE and letting LPCXpresso IDE softload the probe firmware? Or have you preprogrammed the Link2's flash with probe firmware using LPCScrypt?

https://community.nxp.com/message/630661

And have you actually tried any of the troubleshooting suggestions at all in the FAQ we previously pointed you at?

Regards,

LPCXpresso Support

Re: LPC-link 2 is stopped detected by system

priyadarshinisi — Wed, 24 May 2017 09:58:44 GMT

I am using LPC-Link2 with LPCXpresso IDE and letting LPCXpresso IDE

softload the probe firmware.

A few days ago LPC Link-2 was performing well.

I was able to see "LPC Device" in my device and drivers.

Suddenly, Out of the box. It stopped detecting by my system (even I tried

other systems too.)

Re: LPC-link 2 is stopped detected by system

ravicha — Wed, 18 Dec 2024 06:55:30 GMT

did u get the solution i face the same problem i am try to connect mcxc243 with link 2 before it connect but now it is not able to connect so please can u help me with your solution , Thanks