LPC MicrocontrollersのトピックLPC1837: USB Keyboard/Mouse device updating report

LPC1837: USB Keyboard/Mouse device updating report

gvk51 — Sat, 01 Jul 2017 09:36:47 GMT

Hi All,

I am working on LPC1837 based development board, with "lpcopen_2_18_lpcxpresso_nxp_lpcxpresso_1837" SDK as start point. I am working on examples "usbd_rom_hid_keyboard" & "usbd_rom_hid_mouse" they work fine as USB keyboard/mouse device to host machine.

I see from the below logic of the code

even if the g_keyBoard.report is empty it is still writing to endpoint, this is creating a continuous stream of packets to host machine, I observed this using Bus-Hound software. Please give your inputs and how to fix this. I would like to send report only if valid data is present.

Thanks & Regards,

Vamshi G.

Re: LPC1837: USB Keyboard/Mouse device updating report

jeremyzhou — Tue, 04 Jul 2017 03:11:22 GMT

Hi vamshi krishna,

Thank you for your interest in NXP Semiconductor products and

the opportunity to serve you.

You can add the function to detect whether report changes between the Keyboard_UpdateReport() and USBD_API->hw->WriteEP(g_keyBoard.hUsb, HID_EP_IN, &g_keyBoard.report[0], KEYBOARD_REPORT_SIZE), if report keep same you can ignore the USBD_API->hw->WriteEP(g_keyBoard.hUsb, HID_EP_IN, &g_keyBoard.report[0], KEYBOARD_REPORT_SIZE), otherwise, execute it.

Hope it helps.
Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: LPC1837: USB Keyboard/Mouse device updating report

gvk51 — Mon, 17 Jul 2017 15:48:28 GMT

Hi jeremyzhou,

I tried the mechanism as you mentioned, I believe there is some issue in USB ROM driver. once key is pressed, a report with key event is sent, after that I see its keep on sending the same event even if the keyboard report entries (g_keyBoard.report[]) are zero.

Please give your inputs.

Thanks & Regards,

Vamshi G.