topic BOD reset level in LPC Microcontrollers

BOD reset level

peterwöß-krausb — Tue, 08 Aug 2017 08:05:30 GMT

Hello,

table 21 in the datasheet LPC11U6x / Rev. 1.3. shows the characteristics for the

interrupt level 2 & 3, and for reset level 2 & 3.

What are the characteristics for reset level 0 & 1, as table 58 / document UM10732

allows BOD reset level 0, 1, 2, 3.

Best regards,

Peter

Re: BOD reset level

soledad — Thu, 10 Aug 2017 19:44:16 GMT

Hi Peter,

On the LPC11U6x, those levels are not there since the assertion points are below the minimum operating Vdd voltage.

only levels mentioned in the datasheet are workable thresholds available.

Have a great day,
Sol

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: BOD reset level

peterwöß-krausb — Sat, 12 Aug 2017 12:36:51 GMT

thx