Problem while debugging program. RFID module MF RC522.

robertchaim — Wed, 01 Feb 2017 11:34:33 GMT

Hello,

I use the LPC1769 and i have a problem that i can't deal with. It's my first time dealing with LPC programming.

After building a program i have no errors but when i run debugger there is :

"No source available for "semihost_exit() at 0x1f60".

The program is about reading RFID tag ID using module MF RC522. Program is downloaded from mbed.org and i'm using their libraries. Program was originally written for Arduino but after making few adaptations i managed (or not ) to use it with my board.

If you understood what i was trying to ask you about please give me some advice because i have completely no idea how to do with it.

Here is a screen of problems that pops up after running debugger.

Original Attachment has been moved to: RC522.zip

Re: Problem while debugging program. RFID module MF RC522.

Carlos_Mendoza — Thu, 09 Feb 2017 23:10:53 GMT

Hi Robert,

How did you imported the project to LPCXpresso? Maybe you could try creating a new cpp project in LPCXpresso and copy the source files to it.

Hope it helps!

Best Regards,
Carlos Mendoza
Technical Support Engineer

LPC Microcontrollers中的主题 Problem while debugging program. RFID module MF RC522.

Problem while debugging program. RFID module MF RC522.

Re: Problem while debugging program. RFID module MF RC522.