LPC Microcontrollers中的主题 PWM configuration

PWM configuration

ranjithshanbhag — Fri, 17 Feb 2017 07:10:18 GMT

In attached sample code can you help me how to configure PWM in center aligned mode?

Path: LPC824_Example_Code_Bundle_IAR_r1.0\Example_SCT_PWM_2State\src

Original Attachment has been moved to: LPC824_Example_Code_Bundle_LPCXpresso_r1.0.zip

Re: PWM configuration

ranjithshanbhag — Fri, 17 Feb 2017 07:54:48 GMT

Sorry @Kerry Zhou i attached wrong project. Please find the below link for the project
https://community.nxp.com/message/869082?commentID=869082&et=watches.email.thread#comment-869082

Path: LPC824_Example_Code_Bundle_IAR_r1.0\Shared_Project_Source_Code\Example_SCT_PWM_2State\src

Re: PWM configuration

kerryzhou — Tue, 21 Feb 2017 05:18:20 GMT

Hi Ranjith Shanbhag,

Thank you for your trust.

Do you just want to configure the counter to up-down mode?

If yes, please modify the SCT control register, BIDIR_L and BIDIR_H to 1.

Just like the user manual, SCT regiser description:

Please try it on your side.

Wish it helps you!

If you still have question, please let me know!

Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: PWM configuration

ranjithshanbhag — Tue, 21 Feb 2017 05:25:15 GMT

Hi kerryzhou‌,

Thank you for your valuable reply.

What all configuration changes required? By modifying SCT control register, BIDIR_L and BIDIR_H to 1 i am unable to aceive it.
Please help me.

Regards,

Ranjith Shanbhag

Re: PWM configuration

kerryzhou — Tue, 21 Feb 2017 08:45:48 GMT

Hi Ranjith Shanbhag,

How did you know it can't achieve it?

Please give me your test result, and tell me the details how your analysis it. I will check it.

If it is really not OK, I will test it on my side when I have time.

Have a great day,
Kerry

Re: PWM configuration

ranjithshanbhag — Wed, 22 Feb 2017 06:14:43 GMT

Hi kerryzhou‌,

With reference to AN11538 SCTimer/PWM cookbook (page no 15) i have done modification in the code and tested. i am unable to get PWM output.

i need your help to move forward in my project. Please provide your thoughts.

Please find the below link for the project which you shared earlier and in same project i need center aligned configuration.
https://community.nxp.com/message/869082?commentID=869082&et=watches.email.thread#comment-869082

Path: LPC824_Example_Code_Bundle_IAR_r1.0\Shared_Project_Source_Code\Example_SCT_PWM_2State\src

Re: PWM configuration

ranjithshanbhag — Tue, 28 Feb 2017 05:25:48 GMT

hi kerryzhou,

Any update on above discussion?

Regards,

Ranjith

Re: PWM configuration

kerryzhou — Fri, 03 Mar 2017 07:13:50 GMT

Hi Ranjith Shanbhag,

I don't know why you said configure BIDIR_L and BIDIR_H to 1 unable to work?

I just modify these two bits, it works on my side.

As you know, CPWM will make the counter to up-down, so the frequency will half of the original counter up.

This is my test result and code is in the attachment.
This project will generate 250hz at PIO0_16, 50khz PWM at PIO0_12.

Wish it helps you!

Have a great day,
Kerry