topic Re: LPC1769 - LPCOpen 2.10 - PMU application have problem in LPC Microcontrollers

LPC1769 - LPCOpen 2.10 - PMU application have problem

juanmanuelcruz — Tue, 08 Nov 2016 16:58:52 GMT

I´m working with LPCXpresso v8.2.0 [Build 647] [2016-07-18] on LPC1769 & LPCOpen 2.10 (http://cache.nxp.com/files/microcontrollers/software/LPCWare/lpcopen_2_10_lpcxpresso_nxp_lpcxpresso_1769.zip) Powe Mode Use application (periph_pmu.zip) have a problem.

In debug mode when I press Resume (F8) the Sleep mode works OK, but the other three modes (Deep-Sleep, Power-down and Deep-Power-down) don´t work OK => debugging is stopped (see image or attached file).

Re: LPC1769 - LPCOpen 2.10 - PMU application have problem

jeremyzhou — Fri, 11 Nov 2016 02:17:49 GMT

Hi Juan Manuel Cruz,

It's not an issue.

Have a great day,
Ping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: LPC1769 - LPCOpen 2.10 - PMU application have problem

juanmanuelcruz — Fri, 11 Nov 2016 12:35:27 GMT

Thanks jeremyzhou, the debugger does not work in those low-power modes.

But the LPCOpen library has a bug and to fix it => set the microcontroller clock & PLL calling the function Chip_SetupXtalClocking() after WFI or WFE.

Re: LPC1769 - LPCOpen 2.10 - PMU application have problem

jeremyzhou — Mon, 14 Nov 2016 01:57:11 GMT

Hi Juan Manuel Cruz,

Thanks for your reply.

I was wondering if you can clarify where the "bug" reside in.

Thank you in advance.

Have a great day,
Ping

Re: LPC1769 - LPCOpen 2.10 - PMU application have problem

juanmanuelcruz — Tue, 15 Nov 2016 12:16:47 GMT

This application uses a UART of microcontroller to send debug messages, when the CPU returns from the low power modes it is necessary set the microcontroller clock & PLL so that the UART operates correctly again and that we can see OK the UART messages.

Set the microcontroller clock & PLL calling the function Chip_SetupXtalClocking() after WFI or WFE.

We can do this call in the LPCOpen library or in the application, but we must do it for the example to work correctly, OK?

Re: LPC1769 - LPCOpen 2.10 - PMU application have problem

jeremyzhou — Wed, 16 Nov 2016 06:31:16 GMT

Hi Hi Juan Manuel Cruz,

Thanks for your reply.

In the reference manual, it also recommend the user to re-configure the PLLs and clock dividers after the wake-up.

So it good to call the Chip_SetupXtalClocking() to re-configure the PLLs and clock dividers after the wake-up.

And I'll report the issue to the AE for checking.

Have a great day,
Ping