topic Re: Dear Support team, getting "Invalid ROM table error while flashing LPC54608 via keil compiler in LPC Microcontrollers

Dear Support team, getting "Invalid ROM table error while flashing LPC54608 via keil compiler

sujithaselvaraj — Mon, 24 Apr 2017 11:47:56 GMT

dear support team,

Am using LPC54608 controller for sensor based application,getting following error while flashing a device

"Invalid ROM tabel"

Please help me to sort out this problem with needful solution ASAP.

Thanks,

Re: Dear Support team, getting "Invalid ROM table error while flashing LPC54608 via keil compiler

jeremyzhou — Tue, 25 Apr 2017 01:50:14 GMT

Hi sujitha selvaraj,

Thank you for your interest in NXP Semiconductor products and the opportunity to serve you.

Please guarantee reset button must be pressed and release while holding the ISP button down if you encounter this error.

Note that: you need to do some extra work if you use the ULINK2, ULINK-ME and ULINKPro.

make sure the Connect and Reset Options in Options For Target — Debug — Settings are set as follows:

The Connect: option must be set to under Reset
The Reset: option must be set to HW RESET

After saving these options, cycle power on the target device, then try the download again. Your application should download as before.

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Dear Support team, getting "Invalid ROM table error while flashing LPC54608 via keil compiler

sujithaselvaraj — Tue, 25 Apr 2017 12:31:12 GMT

Hi jeremyzhou,

Thank u for your reply..

The Connect: option must be set to under Reset
The Reset: option must be set to HW RESETi tried this solution but didn't work out for me...pls kindly reply with some other solution ASAP.
Thanks in advance,sujitha selvaraj

Re: Dear Support team, getting "Invalid ROM table error while flashing LPC54608 via keil compiler

dark0711 — Thu, 02 Apr 2020 09:55:51 GMT

What to do if ECRP is installed? How to call the function MAss erase by swd?