LPC MicrocontrollersのトピックRe: lpc936

lpc936

cargr — Fri, 04 Nov 2016 12:25:12 GMT

hello, my name is carlos and start this comment for help, I have a programmer for a p89lpc936 icp and can record all the micro but I can not read it. the only thing I've found online about icp mode is fmcon, fmdata and fmadreesl / h. I do not know any command to read both flash and EEPROM. I am initiating me in LPCS.

in Spanish:hola, mi nombre es carlos e inicio este comentario para pedir ayuda, tengo un programador icp para un p89lpc936 y puedo grabar todo el micro pero no puedo leerlo. lo unico que he encontrado por internet sobre el modo icp es fmcon,fmdata y fmadreesl/h. no conozco ningun comando que lea tanto la flash como la eeprom. estoy iniciandome en los lpcs. gracias.

Re: lpc936

vicentegomez — Fri, 04 Nov 2016 19:54:09 GMT

Please be aware that all the LPC9xx is obsolete and is no longer available. Please let me know if you want information about other device.

Have a good day

Regards

Vicente Gomez

Re: lpc936

cargr — Sat, 05 Nov 2016 01:30:26 GMT

Ok, thanks.

El 4 nov 2016, a las 20:54, vicentegomez <admin@community.nxp.com> escribió:
NXP Community
Re: lpc936
reply from Vicente Gomez Salazar in LPC - View the full discussion
Please be aware that all the LPC9xx is obsolete and is no longer available. Please let me know if you want information about other device.

Have a good day

Regards
Vicente Gomez
Reply to this message by replying to this email, or go to the message on NXP Community
Start a new discussion in LPC by email or at NXP Community
Following Re: lpc936 in these streams: Inbox
This email was sent by NXP Community because you are a registered user.
You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences