Memory resources used for boot loader for LPC54606

Jetcitycowboy — Fri, 21 Apr 2017 20:22:38 GMT

I also have a separate but related question around the internal flash programming. Is the only way to program/erase the internal flash, from the user application code or the IAR flash writer’s monitor code, by calling the IAP (boot rom) flash programming APIs? If so, can you please clarify on the amount of SRAM0 these boot ROM/IAP can use? 41.3.8.2 is troubling. If the internal boot rom/IAP calls require access to the SRAM0 (or other memory/shared resources) then Microsoft needs to have a list of all such usages, for their secondary boot loader. If their application needs to call the IAP APIs then they would need to budget resources accordingly. Thank you.

Re: Memory resources used for boot loader for LPC54606

Hui_Ma — Wed, 26 Apr 2017 09:28:21 GMT

Hi ,

Please check my feedback at the thread below:

https://community.nxp.com/thread/449736

best regards,

Hui

topic Memory resources used for boot loader for LPC54606 in LPC Microcontrollers

Memory resources used for boot loader for LPC54606

Re: Memory resources used for boot loader for LPC54606