topic Re: LPC11A14FHN33 Current consumption in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/LPC11A14FHN33-Current-consumption/m-p/627217#M24654 <HTML><HEAD></HEAD><BODY><P>Hi Sainer,</P><P></P><P>You can find the peripheral power consumption information on the table 7 on the datasheet:</P><P></P><P><A class="link-titled" href="http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf" title="http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf">http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf</A>&nbsp;</P><P></P><P>The supply current per peripheral is measured as the difference in supply current between the peripheral block enabled and the peripheral block disabled in the SYSAHBCLKCFG and PDRUNCFG (for analog blocks) registers.</P><P><BR />Hope it helps!</P><P></P><P>Best Regards,<BR />Carlos Mendoza<BR />Technical Support Engineer</P></BODY></HTML> Thu, 20 Oct 2016 21:56:15 GMT Carlos_Mendoza 2016-10-20T21:56:15Z LPC11A14FHN33 Current consumption https://community.nxp.com/t5/LPC-Microcontrollers/LPC11A14FHN33-Current-consumption/m-p/627216#M24653 <HTML><HEAD></HEAD><BODY><P>Hi, I am using LPC11A14FHN33 right now. Is there a calculation sheet that can be used to calculate the current consumption of the IC when I use the internal peripherals (such as DAC or ADC) and GPIOs?. It is written on the datasheet that of&nbsp;disable mode, otherwise I couldn't find it.</P><P></P><P>Thanks</P><P></P><P>Sainer</P></BODY></HTML> Wed, 12 Oct 2016 05:54:51 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC11A14FHN33-Current-consumption/m-p/627216#M24653 sainersiagian 2016-10-12T05:54:51Z Re: LPC11A14FHN33 Current consumption https://community.nxp.com/t5/LPC-Microcontrollers/LPC11A14FHN33-Current-consumption/m-p/627217#M24654 <HTML><HEAD></HEAD><BODY><P>Hi Sainer,</P><P></P><P>You can find the peripheral power consumption information on the table 7 on the datasheet:</P><P></P><P><A class="link-titled" href="http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf" title="http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf">http://www.nxp.com/documents/data_sheet/LPC11AXX.pdf</A>&nbsp;</P><P></P><P>The supply current per peripheral is measured as the difference in supply current between the peripheral block enabled and the peripheral block disabled in the SYSAHBCLKCFG and PDRUNCFG (for analog blocks) registers.</P><P><BR />Hope it helps!</P><P></P><P>Best Regards,<BR />Carlos Mendoza<BR />Technical Support Engineer</P></BODY></HTML> Thu, 20 Oct 2016 21:56:15 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC11A14FHN33-Current-consumption/m-p/627217#M24654 Carlos_Mendoza 2016-10-20T21:56:15Z