LPC Microcontrollersのトピック Flash programming in LPCXpresso via Command line

Flash programming in LPCXpresso via Command line

lpcware — Wed, 15 Jun 2016 20:23:52 GMT

Content originally posted in LPCWare by RatheeshT on Tue Mar 08 02:35:07 MST 2016
Hi All,
I am flashing my binary file(.axf) using CMD window with the below command

"crt_emu_cm_redlink -flash-load-exec "app.axf file with path" -g -2 -vendor=NXP -pLPC11A04UK -ConnectScript=LPC11AXXConnect.scp -reset=vectreset -flash-driver=LPC11_12_13_32K_8K.cfx".

It is downloading file fine but it is failed to start execution of application as soon as download has completed.. To start application execution, i need to press reset switch in the board. As per "-flash-load-exec", it should execute application when download has completed.

Please give me your suggestions to solve this issue?

Thanks in advance

Regards,
Ratheesh T

Re: Flash programming in LPCXpresso via Command line

lpcware — Wed, 15 Jun 2016 20:23:53 GMT

Content originally posted in LPCWare by vtw.433e on Tue Mar 08 02:41:07 MST 2016
You probably need a reset script too:

-ResetScript=LPC11AXXReset.scp

Re: Flash programming in LPCXpresso via Command line

lpcware — Wed, 15 Jun 2016 20:23:53 GMT

Content originally posted in LPCWare by RatheeshT on Tue Mar 08 02:45:59 MST 2016
Thank you for your quick response,

I will try and update you

Re: Flash programming in LPCXpresso via Command line

lpcware — Wed, 15 Jun 2016 20:23:54 GMT

Content originally posted in LPCWare by RatheeshT on Tue Mar 08 03:36:06 MST 2016
it's working...... Thankyou....

Re: Flash programming in LPCXpresso via Command line

lpcware — Sun, 19 Jun 2016 01:04:21 GMT

bump