Can Bus-Off problem

yeqing85123 — Mon, 18 Jul 2016 01:55:37 GMT

Hi , I have a problem when use can bus of Lpc1768. When the can bus run into Bus-Off state,I try to restart it. According to the LPC17xx User Manual, Below is my restart code:

LPC_CAN1->MOD = 1; // Enter Reset Mode

LPC_CAN1->GSR = 0; // Clear the Tx error counter

LPC_CAN1->CMR = (1<<1)|(1<<2)|(1<<3);// reset cmr

LPC_CAN1->MOD = 0;// Return Normal operating

But ,after 128 Bus Free condition (11 consecutive recessive bits),the bus still off.

How could I handled the Bus-Off error?

Thanks a lot.

Re: Can Bus-Off problem

kerryzhou — Tue, 26 Jul 2016 07:25:17 GMT

Hi Customer,

I found you already create 2 posts which have the same question with this post, I already answer you in your another post:

lpc1768 can 总线 bus_off 如何恢复

Please refer to that answer, and try again.

If you still have question after testing, please reply me in your above link, I will provide service in that post.

Wish it helps you!

Have a great day,
Jingjing

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

LPC MicrocontrollersのトピックRe: Can Bus-Off problem

Can Bus-Off problem

Re: Can Bus-Off problem