topic Re: Mass Storage Device example not available for v2.xx in LPC Microcontrollers

Mass Storage Device example not available for v2.xx

lpcware — Wed, 15 Jun 2016 19:04:16 GMT

Content originally posted in LPCWare by boost on Thu Dec 17 07:49:12 MST 2015
Hi,

Is there any updated version of the mass storage device example available for the 43xx boards?
It doesnt seem like it has been updated since v1.03 (http://docs.lpcware.com/lpcopen/v1.03/group___u_s_b___mass___storage___device__18xx43xx.html)

Is there any specific reason why this example is not available in v2.xx? Or is it already available?
If not any advice on how to port it?

Thanks in advance.

Re: Mass Storage Device example not available for v2.xx

lpcware — Wed, 15 Jun 2016 19:04:17 GMT

Content originally posted in LPCWare by inspire on Wed Dec 30 05:48:16 MST 2015
Hi boost,

I think here you find the information you are looking for: https://www.lpcware.com/content/forum/usb-mass-storage-sd-card

In this thread mc posted a solution for the LPC1837. I could successfully copy the whole code into a LPC4330 project.

Have a nice day,
inspire

Re: Mass Storage Device example not available for v2.xx

lpcware — Wed, 15 Jun 2016 19:04:18 GMT

Content originally posted in LPCWare by boost on Wed Jan 27 10:45:08 MST 2016
Dear Inspire,

Thanks a lot for your help!.

The example helped me out a lot.
However I ran into another problem. The version of the ROM stack driver is too low. Therefore it only supports up to 4gb.

Is there a way to update this driver? If not, how do i know if a board contains a certain version(without running code on it)?

thank you for your time.