LPC MicrocontrollersのトピックRe: UART baudate selection in the LPCOPEN https://community.nxp.com/t5/LPC-Microcontrollers/UART-baudate-selection-in-the-LPCOPEN/m-p/576260#M19403 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:09:43 GMT lpcware 2016-06-19T01:09:43Z UART baudate selection in the LPCOPEN https://community.nxp.com/t5/LPC-Microcontrollers/UART-baudate-selection-in-the-LPCOPEN/m-p/576259#M19402 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by dizgah on Mon May 02 00:30:34 MST 2016</STRONG><BR /><SPAN>whats differences between 2 below functions?</SPAN><BR /><TABLE border="1"><TBODY><TR><TD bgcolor="#cacaca"> <PRE>Chip_Clock_SetUSARTNBaseClockRate((115200 * 16), true); Chip_UART_SetBaud(LPC_USART1, 115200);</PRE> </TD></TR></TBODY></TABLE><BR /><SPAN>As i know second is for setting baud rate,but i'm in doubt about first,why it must be ratio of 16? for 9.6 Kbps is 115200 must changed to 9600?</SPAN><BR /><SPAN>WBR.</SPAN></BODY></HTML> Wed, 15 Jun 2016 20:15:44 GMT https://community.nxp.com/t5/LPC-Microcontrollers/UART-baudate-selection-in-the-LPCOPEN/m-p/576259#M19402 lpcware 2016-06-15T20:15:44Z Re: UART baudate selection in the LPCOPEN https://community.nxp.com/t5/LPC-Microcontrollers/UART-baudate-selection-in-the-LPCOPEN/m-p/576260#M19403 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:09:43 GMT https://community.nxp.com/t5/LPC-Microcontrollers/UART-baudate-selection-in-the-LPCOPEN/m-p/576260#M19403 lpcware 2016-06-19T01:09:43Z