LPC Microcontrollers中的主题 Using flash for storing non-volatile data for my application https://community.nxp.com/t5/LPC-Microcontrollers/Using-flash-for-storing-non-volatile-data-for-my-application/m-p/574256#M18988 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by maszup on Thu May 02 16:07:47 MST 2013</STRONG><BR /><P>hello</P><BR /><P>is it possible to read/write into e.g. flash memory 0x1A07000 to store there some application's parameters even after power down?</P><BR /><P>i keep my M4 code at flash 0x1A000000 and M0 code at 0x1B000000 and I know that my code is less engough so that it does not overlap on my parameters data.</P><BR /><P>anyway if i try to do memcpy to this address (0x1A070000) i got the hard fault error.</P><BR /><P>thanks for any kind of help.</P><BR /></BODY></HTML> Wed, 15 Jun 2016 18:57:52 GMT lpcware 2016-06-15T18:57:52Z Using flash for storing non-volatile data for my application https://community.nxp.com/t5/LPC-Microcontrollers/Using-flash-for-storing-non-volatile-data-for-my-application/m-p/574256#M18988 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by maszup on Thu May 02 16:07:47 MST 2013</STRONG><BR /><P>hello</P><BR /><P>is it possible to read/write into e.g. flash memory 0x1A07000 to store there some application's parameters even after power down?</P><BR /><P>i keep my M4 code at flash 0x1A000000 and M0 code at 0x1B000000 and I know that my code is less engough so that it does not overlap on my parameters data.</P><BR /><P>anyway if i try to do memcpy to this address (0x1A070000) i got the hard fault error.</P><BR /><P>thanks for any kind of help.</P><BR /></BODY></HTML> Wed, 15 Jun 2016 18:57:52 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Using-flash-for-storing-non-volatile-data-for-my-application/m-p/574256#M18988 lpcware 2016-06-15T18:57:52Z