LPC Microcontrollers中的主题 Re: How to use S25FL016K SPI Flash with DMA in lpc4357? https://community.nxp.com/t5/LPC-Microcontrollers/How-to-use-S25FL016K-SPI-Flash-with-DMA-in-lpc4357/m-p/573666#M18871 <HTML><HEAD></HEAD><BODY><P>Hi Jigar,</P><P></P><P>Please take a look to the below community thread, I think it might be helpful for you:</P><P></P><P><A href="https://community.nxp.com/message/760841">DMA to/from SPIFI</A> </P><P></P><P>Hope it helps!</P><P></P><P>Best Regards,</P><P>Carlos Mendoza</P><P>Technical Support Engineer</P></BODY></HTML> Wed, 17 Aug 2016 22:01:27 GMT Carlos_Mendoza 2016-08-17T22:01:27Z How to use S25FL016K SPI Flash with DMA in lpc4357? https://community.nxp.com/t5/LPC-Microcontrollers/How-to-use-S25FL016K-SPI-Flash-with-DMA-in-lpc4357/m-p/573665#M18870 <HTML><HEAD></HEAD><BODY><P><BR />Hello,</P><P></P><P>I'm using Embedded artist LPC4357 board.I want to configure Spansion s25fl016k SPI Flash with spifi controller using DMA to transer large data.Tried lpcspifilib but can't find relevent.</P><P>Has somebody tried SPIFI with DMA if yes please suggest any solution.</P><P>Is there any other method for using the same?</P><P></P><P>Thanks</P></BODY></HTML> Fri, 05 Aug 2016 05:14:13 GMT https://community.nxp.com/t5/LPC-Microcontrollers/How-to-use-S25FL016K-SPI-Flash-with-DMA-in-lpc4357/m-p/573665#M18870 jigar2 2016-08-05T05:14:13Z Re: How to use S25FL016K SPI Flash with DMA in lpc4357? https://community.nxp.com/t5/LPC-Microcontrollers/How-to-use-S25FL016K-SPI-Flash-with-DMA-in-lpc4357/m-p/573666#M18871 <HTML><HEAD></HEAD><BODY><P>Hi Jigar,</P><P></P><P>Please take a look to the below community thread, I think it might be helpful for you:</P><P></P><P><A href="https://community.nxp.com/message/760841">DMA to/from SPIFI</A> </P><P></P><P>Hope it helps!</P><P></P><P>Best Regards,</P><P>Carlos Mendoza</P><P>Technical Support Engineer</P></BODY></HTML> Wed, 17 Aug 2016 22:01:27 GMT https://community.nxp.com/t5/LPC-Microcontrollers/How-to-use-S25FL016K-SPI-Flash-with-DMA-in-lpc4357/m-p/573666#M18871 Carlos_Mendoza 2016-08-17T22:01:27Z