LPC MicrocontrollersのトピックRe: ISP programming lpc4430

ISP programming lpc4430

lpcware — Wed, 15 Jun 2016 18:57:19 GMT

Content originally posted in LPCWare by kumarbhimesh on Wed Dec 17 01:47:03 MST 2014
Hi,

I am newbie to lpc. We have custom made lpc4430 board with external flash.

We need to flash the external flash using ISP programmer.

Can you suggest me Hardware and Software tools and any documentation for flash procedure.

Regards,
Bhimesh.

Re: ISP programming lpc4430

lpcware — Wed, 15 Jun 2016 18:57:19 GMT

Content originally posted in LPCWare by bavarian on Wed Dec 17 02:16:46 MST 2014
Use Flash Magic for serial programming:

http://www.flashmagictool.com/

Select the external flash (I assume you used a qSPI flash) as shown in the attached picture.

You can also use the USB port for ISP, please look here:

http://www.lpcware.com/content/nxpfile/nxp-lpc18xx43xx-dfu-download-and-secure-image-generator

Regards,
NXP Support Team

Re: ISP programming lpc4430

lpcware — Wed, 15 Jun 2016 18:57:20 GMT

Content originally posted in LPCWare by kumarbhimesh on Wed Dec 17 02:30:28 MST 2014

Hi,

Thank you so much for the support.

please let me know hardware tool to flash.

Micro controller : LPC4330FET180

External Flash : N25Q064A13ESE40E

Boot mode is USART0 with P2_7 pin is low.

Regards,
Bhimesh.