LPC MicrocontrollersのトピックCAN reception of address range https://community.nxp.com/t5/LPC-Microcontrollers/CAN-reception-of-address-range/m-p/571835#M18465 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by rmilne on Thu Mar 28 08:42:21 MST 2013</STRONG><BR /><SPAN>I have no issue getting the LPCOpen periph_ccan demo to work but I cannot figure out how to set the filtering to allow any extended message to appear in a message buffer.&nbsp; I see the RXOK bit getting set in the status register but the intid is always 0.&nbsp; The documentation (UM10503.pdf) is poor and the code examples are for single address only (no address range example).&nbsp; Can someone please direct me to a project or document that clearly illustrates how to setup the peripheral to receive a range of CAN extended ids?</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:55:25 GMT lpcware 2016-06-15T18:55:25Z CAN reception of address range https://community.nxp.com/t5/LPC-Microcontrollers/CAN-reception-of-address-range/m-p/571835#M18465 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by rmilne on Thu Mar 28 08:42:21 MST 2013</STRONG><BR /><SPAN>I have no issue getting the LPCOpen periph_ccan demo to work but I cannot figure out how to set the filtering to allow any extended message to appear in a message buffer.&nbsp; I see the RXOK bit getting set in the status register but the intid is always 0.&nbsp; The documentation (UM10503.pdf) is poor and the code examples are for single address only (no address range example).&nbsp; Can someone please direct me to a project or document that clearly illustrates how to setup the peripheral to receive a range of CAN extended ids?</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:55:25 GMT https://community.nxp.com/t5/LPC-Microcontrollers/CAN-reception-of-address-range/m-p/571835#M18465 lpcware 2016-06-15T18:55:25Z Re: CAN reception of address range https://community.nxp.com/t5/LPC-Microcontrollers/CAN-reception-of-address-range/m-p/571836#M18466 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by rmilne on Fri Apr 05 04:56:12 MST 2013</STRONG><BR /><P>Wasn't getting enough sleep.&nbsp; Simply had to zero the MSK1 and MSK2 id bits.</P><BR /><P>My low opinion of the documentation remains intact.</P></BODY></HTML> Wed, 15 Jun 2016 18:55:25 GMT https://community.nxp.com/t5/LPC-Microcontrollers/CAN-reception-of-address-range/m-p/571836#M18466 lpcware 2016-06-15T18:55:25Z