This script is designed for working with only a LPC4350 in the JTAG chain.

penghaopenghao — Mon, 29 Aug 2016 09:11:24 GMT

编译器：IAR for arm 7.50

调试器：lpc-link2

j-link 版本：v6.00

板子是我们自己做的lpc4370的板子

工程使用的是:lpcopen_2_04_keil_iar_nxp_lpclink2_4370

进入调试的时候连接不上板子，出现：

This script is designed for working with only a LPC4350 in the JTAG chain.

确认板子的jtag和调试器链接没有问题。调试器我用LPC4330_Xplorer链接没用问题，请教一下哪里出了问题，初次使用lpc4370.

Re: This script is designed for working with only a LPC4350 in the JTAG chain.

jeremyzhou — Tue, 30 Aug 2016 02:24:52 GMT

Hi,

LPC-Link2是支持各个LPC系列的MCU，除了LPC2xxx (ARM7) , LPC3xxx (ARM9).

我建议你可以按照这个帖子的方法，更新完固件后，重新调试。

【经验分享】LPC-LINK2 仿真接口使用注意事项 - ARM Cortex-M系列产品 - 恩智浦技术社区 - 手机版 - Powered by Discuz!
Have a great day,
Ping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

LPC MicrocontrollersのトピックRe: This script is designed for working with only a LPC4350 in the JTAG chain.

This script is designed for working with only a LPC4350 in the JTAG chain.

Re: This script is designed for working with only a LPC4350 in the JTAG chain.