LPC MicrocontrollersのトピックLPC810 System Initialization and Configuration

LPC810 System Initialization and Configuration

lpcware — Wed, 15 Jun 2016 20:02:00 GMT

Content originally posted in LPCWare by gopi_rm on Thu Jan 02 08:37:07 MST 2014
Hi, I'm new to LPC810 microcontroller. I want to use this uC for a GPS project.
Below are the resources I want to use:
1. Internal clock source
2. 1 UART receiver
3. 1 UART transmitter
4. 4 8-bit registers to be configured as FIFO

What are the SFRs I need to configure to use the above resources?

Re: LPC810 System Initialization and Configuration

lpcware — Wed, 15 Jun 2016 20:02:01 GMT

Content originally posted in LPCWare by lpcxpresso-support on Fri Jan 03 02:17:30 MST 2014
I suggest that you start off by looking at LPCOpen…

http://www.lpcware.com/lpcopen

The LPC8xx family version can then be found at:

http://www.lpcware.com/content/nxpfile/lpcopen-software-development-platform-lpc8xx-packages

Regards,
LPCXpresso Support