topic Re: LPC43xx IAP Read page in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/LPC43xx-IAP-Read-page/m-p/559484#M15854 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by MikeSimmonds on Wed Nov 05 11:38:34 MST 2014</STRONG><BR /><SPAN>Just read the flash memory area the same as ram; only the address is different.</SPAN><BR /><SPAN>It is only writing to flash (erasing/programming) that needs IAP.</SPAN><BR /><SPAN>[Unless you have set code-read-protection of course, then, obviously, you cannot read or write flash!]</SPAN><BR /><BR /><SPAN>I.e. memcpy(ramBuff, flashPageAddress, pageSize); in "C"</SPAN><BR /><SPAN>Get the start of flash address etc. from your user manual.</SPAN><BR /><BR /><SPAN>Mike</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:44:42 GMT lpcware 2016-06-15T18:44:42Z LPC43xx IAP Read page https://community.nxp.com/t5/LPC-Microcontrollers/LPC43xx-IAP-Read-page/m-p/559483#M15853 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by snovik on Wed Nov 05 08:40:01 MST 2014</STRONG><BR /><SPAN>Hello!</SPAN><BR /><BR /><SPAN>I want to make a custom bootloader MSC for load firmware to flash.</SPAN><BR /><SPAN>I do not see IAP read page/sector a flash in the datasheet and in the functions of the library. How to read a page / sector&nbsp; in internal flash?</SPAN><BR /><BR /><SPAN>Thanks.</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:44:41 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC43xx-IAP-Read-page/m-p/559483#M15853 lpcware 2016-06-15T18:44:41Z Re: LPC43xx IAP Read page https://community.nxp.com/t5/LPC-Microcontrollers/LPC43xx-IAP-Read-page/m-p/559484#M15854 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by MikeSimmonds on Wed Nov 05 11:38:34 MST 2014</STRONG><BR /><SPAN>Just read the flash memory area the same as ram; only the address is different.</SPAN><BR /><SPAN>It is only writing to flash (erasing/programming) that needs IAP.</SPAN><BR /><SPAN>[Unless you have set code-read-protection of course, then, obviously, you cannot read or write flash!]</SPAN><BR /><BR /><SPAN>I.e. memcpy(ramBuff, flashPageAddress, pageSize); in "C"</SPAN><BR /><SPAN>Get the start of flash address etc. from your user manual.</SPAN><BR /><BR /><SPAN>Mike</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:44:42 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC43xx-IAP-Read-page/m-p/559484#M15854 lpcware 2016-06-15T18:44:42Z