LPC Microcontrollers中的主题 Re: arm-uclinuxeabi- have same problem https://community.nxp.com/t5/LPC-Microcontrollers/arm-uclinuxeabi-have-same-problem/m-p/556230#M15130 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:06:12 GMT lpcware 2016-06-19T01:06:12Z arm-uclinuxeabi- have same problem https://community.nxp.com/t5/LPC-Microcontrollers/arm-uclinuxeabi-have-same-problem/m-p/556229#M15129 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by hujiafu on Thu Mar 24 06:59:23 MST 2016</STRONG><BR /><SPAN>I was porting the lpc1788 on uclinux. and use arm-uclinuxeabi-gcc </SPAN><BR /><SPAN>when I porting minigui, it used libc.a and libpthread.a, but it caused SEVG error.</SPAN><BR /><SPAN>finally I found the libc.a and libpthread.a compilered as ARM code (32bit), but Lpc1788 is based on cortex-m3, it's only support Thumb code (16 bit), so I must compiler libc and libpthread by myself. </SPAN><BR /><SPAN>However the glibc check my cross toolchain and reported the arm-uclinuxeabi-ld is too old.</SPAN><BR /><SPAN>my toolchain is </SPAN><STRONG>arm-2010q1-uclinux</STRONG><SPAN> .</SPAN><BR /><SPAN>1. can any one have new version toolchain for uclinux ?</SPAN><BR /><SPAN>2. the&nbsp; arm-uclinuxeabi-gcc is used uclibc or glibc ?</SPAN><BR /><SPAN>can any one help me? </SPAN><BR /><SPAN>thank you !!!</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:55:19 GMT https://community.nxp.com/t5/LPC-Microcontrollers/arm-uclinuxeabi-have-same-problem/m-p/556229#M15129 lpcware 2016-06-15T19:55:19Z Re: arm-uclinuxeabi- have same problem https://community.nxp.com/t5/LPC-Microcontrollers/arm-uclinuxeabi-have-same-problem/m-p/556230#M15130 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:06:12 GMT https://community.nxp.com/t5/LPC-Microcontrollers/arm-uclinuxeabi-have-same-problem/m-p/556230#M15130 lpcware 2016-06-19T01:06:12Z