LPC MicrocontrollersのトピックEthernet secondary ISP bootloader UDP socket initialization problem https://community.nxp.com/t5/LPC-Microcontrollers/Ethernet-secondary-ISP-bootloader-UDP-socket-initialization/m-p/549769#M13888 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by ashok.r on Sun Jul 20 22:37:52 MST 2014</STRONG><BR /><SPAN>We are using your LPC2388 since last 5 years and we are using the same in to our three to four product ..currently we are loading the Hex file using the Flash magic using the RS232 port....</SPAN><BR /><BR /><SPAN>- But now we want to load the Hex file using the Ethernet port using Ethernet flash utility...</SPAN><BR /><BR /><SPAN>- We have downloaded the secondary ISP Boot-loader code for the ethernet and sample blinky from the your website...</SPAN><BR /><BR /><SPAN>- We have also downloaded the Application note AN1074 and following the each step mention in to the same...</SPAN><BR /><BR /><SPAN>- We are using the same code that provided on website to load the Blinky hex file using the Ethernet flash utility...</SPAN><BR /><BR /><SPAN>- We provided the 192.168.0.1 to desktop PC and connect the Our LPC2388 board Ethernet Port second end to Desktop PC using the crossover Ethernet cable....</SPAN><BR /><BR /><SPAN>-But currently , when we are going to load the blinky hex file by ethernet flash utility then getting " UDP socket Initialization Problem " and Some time getting " UDP communication error " ...</SPAN><BR /><BR /><SPAN>-So what could be the problem , why we are getting " UDP Initialization error" Do we need to change anything in to ethernet Bootloader or Blinky code?</SPAN><BR /><BR /><SPAN>- Awaiting for your earlier valuable reply.</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:52:04 GMT lpcware 2016-06-15T19:52:04Z Ethernet secondary ISP bootloader UDP socket initialization problem https://community.nxp.com/t5/LPC-Microcontrollers/Ethernet-secondary-ISP-bootloader-UDP-socket-initialization/m-p/549769#M13888 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by ashok.r on Sun Jul 20 22:37:52 MST 2014</STRONG><BR /><SPAN>We are using your LPC2388 since last 5 years and we are using the same in to our three to four product ..currently we are loading the Hex file using the Flash magic using the RS232 port....</SPAN><BR /><BR /><SPAN>- But now we want to load the Hex file using the Ethernet port using Ethernet flash utility...</SPAN><BR /><BR /><SPAN>- We have downloaded the secondary ISP Boot-loader code for the ethernet and sample blinky from the your website...</SPAN><BR /><BR /><SPAN>- We have also downloaded the Application note AN1074 and following the each step mention in to the same...</SPAN><BR /><BR /><SPAN>- We are using the same code that provided on website to load the Blinky hex file using the Ethernet flash utility...</SPAN><BR /><BR /><SPAN>- We provided the 192.168.0.1 to desktop PC and connect the Our LPC2388 board Ethernet Port second end to Desktop PC using the crossover Ethernet cable....</SPAN><BR /><BR /><SPAN>-But currently , when we are going to load the blinky hex file by ethernet flash utility then getting " UDP socket Initialization Problem " and Some time getting " UDP communication error " ...</SPAN><BR /><BR /><SPAN>-So what could be the problem , why we are getting " UDP Initialization error" Do we need to change anything in to ethernet Bootloader or Blinky code?</SPAN><BR /><BR /><SPAN>- Awaiting for your earlier valuable reply.</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:52:04 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Ethernet-secondary-ISP-bootloader-UDP-socket-initialization/m-p/549769#M13888 lpcware 2016-06-15T19:52:04Z