topic Re: LPC11C24 LPCXpresso Board Programming Errors in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/LPC11C24-LPCXpresso-Board-Programming-Errors/m-p/545638#M13115 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by lab1 on Wed Mar 12 05:55:00 MST 2014</STRONG><BR /><SPAN>I solved the problem myself.</SPAN><BR /><SPAN>The solution is to short-circuit the P0_1 to ground and restart the chip. Then erase coden, remove the short circuit and restart the chip again.</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:46:45 GMT lpcware 2016-06-15T19:46:45Z LPC11C24 LPCXpresso Board Programming Errors https://community.nxp.com/t5/LPC-Microcontrollers/LPC11C24-LPCXpresso-Board-Programming-Errors/m-p/545637#M13114 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by lab1 on Wed Mar 12 05:28:40 MST 2014</STRONG><BR /><SPAN>I try to program a </SPAN><STRONG>LPC11C24 LPCXpresso Board</STRONG><SPAN>, but no matter what code I try to program into it, then I get these 2 error codes.</SPAN><BR /><BR /><STRONG>Error 1 </STRONG><BR /><SPAN>02: Failed on connect 02: Failed on connect </SPAN><BR /><SPAN>Bad ACK returned from status - wire error.</SPAN><BR /><SPAN>Emu(0): Connected. Was: None. DpID:&nbsp;&nbsp;&nbsp;&nbsp; EDB6. Info: HID64HS12</SPAN><BR /><BR /><STRONG>Error 2</STRONG><BR /><SPAN>Error in final launch sequence Failed to execute MI command:</SPAN><BR /><SPAN>-target-select extended-remote | crt_emu_lpc11_13_nxp -msg-port=49525 -g -mi -2 -pLPC11C24/301 -vendor=NXP -e0 -wire=hid -flash-driver=LPC11_12_13_32K_8K.cfx</SPAN><BR /><SPAN>Error message from debugger back end:</SPAN><BR /><SPAN>Remote communication error.&nbsp; Target disconnected.: No error.</SPAN><BR /><SPAN>Remote communication error.&nbsp; Target disconnected.: No error.</SPAN><BR /><BR /><BR /><SPAN>The program is </SPAN><STRONG>nxp_lpcxpresso_11c24_periph_adc</STRONG><SPAN>.</SPAN><BR /><SPAN>Does anyone know what the error is?</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:46:43 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC11C24-LPCXpresso-Board-Programming-Errors/m-p/545637#M13114 lpcware 2016-06-15T19:46:43Z Re: LPC11C24 LPCXpresso Board Programming Errors https://community.nxp.com/t5/LPC-Microcontrollers/LPC11C24-LPCXpresso-Board-Programming-Errors/m-p/545638#M13115 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by lab1 on Wed Mar 12 05:55:00 MST 2014</STRONG><BR /><SPAN>I solved the problem myself.</SPAN><BR /><SPAN>The solution is to short-circuit the P0_1 to ground and restart the chip. Then erase coden, remove the short circuit and restart the chip again.</SPAN></BODY></HTML> Wed, 15 Jun 2016 19:46:45 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC11C24-LPCXpresso-Board-Programming-Errors/m-p/545638#M13115 lpcware 2016-06-15T19:46:45Z