Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ?

lpcware — Wed, 15 Jun 2016 18:27:46 GMT

Content originally posted in LPCWare by Pradeep Kumar on Sat Oct 26 00:17:29 MST 2013
Hi,

I am using FDI-LPC 3250 custom board ported with kernel 2.6.34 and Uboot 2009.03.In this we have 7 UARTS. UART 1,2,7 are High speed and UART

3,4,5,6 are standard UARTS.In my project we need use all UARTS.For this i enable all UARTS in kernel configuration. But in Uboot i have changed serial

console from UART5 to other UARTS 1,2,3,4,6,7 in uboot fdi3250.h file for testing purpose. UART 1,2,3,4 are working fine. But for UART 6 and UART

7 am not getting any dmesg on console.For this i checked in uboot for different uarts and serial_init().Still i don't get any idea for how to define or work these

UART6 and UART7 in UBOOT...

Any ideas for this issue ?

Thanks in Adv & Regards,

Pradeep Kumar G.

Re: Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ?

lpcware — Wed, 15 Jun 2016 18:27:46 GMT

Content originally posted in LPCWare by trichloramine on Tue Nov 04 15:12:59 MST 2014
if you want to use the 3250 firmware to boot through the serial port, you have to use Uart 5, 115200.

topic Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ? in LPC Microcontrollers

Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ?

Re: Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ?