LPC MicrocontrollersのトピックRe: How to change the xtal frequency slightly https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539032#M11787 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ivar on Fri Jul 18 12:18:56 MST 2014</STRONG><BR /><SPAN>Ok, I'll try that.</SPAN><BR /><BR /><SPAN>Thank you very much.</SPAN><BR /><BR /><SPAN>Ivar </SPAN></BODY></HTML> Wed, 15 Jun 2016 18:23:08 GMT lpcware 2016-06-15T18:23:08Z How to change the xtal frequency slightly https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539030#M11785 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ivar on Mon Jul 14 20:32:21 MST 2014</STRONG><BR /><SPAN>Is there any way to change the xtal frequency slightly so that i can achive the desired working frequency.</SPAN><BR /><BR /><SPAN>My board with LPC1830 has a 12 Mhz xtal. The processor run with 120 MHz.</SPAN><BR /><BR /><SPAN>I want to change the frequency at about 20 kHz to minimize RF interference in another circuit. Is it possible to make this adjustment?</SPAN><BR /><BR /><SPAN>Thank you.</SPAN><BR /><BR /><SPAN>Ivar.</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:23:07 GMT https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539030#M11785 lpcware 2016-06-15T18:23:07Z Re: How to change the xtal frequency slightly https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539031#M11786 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by embd02161991 on Fri Jul 18 10:23:25 MST 2014</STRONG><BR /><SPAN>Hi,</SPAN><BR /><BR /><SPAN>Changing the load capacitance on the crystal pins, may shift the frequency by a few percent. There will not be any drastic changes in frequency though.</SPAN><BR /><BR /><SPAN>Thanks</SPAN><BR /><SPAN>NXP Technical Support</SPAN><BR /></BODY></HTML> Wed, 15 Jun 2016 18:23:07 GMT https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539031#M11786 lpcware 2016-06-15T18:23:07Z Re: How to change the xtal frequency slightly https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539032#M11787 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ivar on Fri Jul 18 12:18:56 MST 2014</STRONG><BR /><SPAN>Ok, I'll try that.</SPAN><BR /><BR /><SPAN>Thank you very much.</SPAN><BR /><BR /><SPAN>Ivar </SPAN></BODY></HTML> Wed, 15 Jun 2016 18:23:08 GMT https://community.nxp.com/t5/LPC-Microcontrollers/How-to-change-the-xtal-frequency-slightly/m-p/539032#M11787 lpcware 2016-06-15T18:23:08Z