LPC MicrocontrollersのトピックRe: Problem with erase sector.. https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538653#M11711 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:10:30 GMT lpcware 2016-06-19T01:10:30Z Problem with erase sector.. https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538651#M11709 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by ElecoLPC on Tue May 10 00:59:38 MST 2016</STRONG><BR /><SPAN>Hi,</SPAN><BR /><SPAN>I'm working on LPC1115, I'm trying to write my boot loader code. The IAP command works well, but if I erase 3 sector (1 to 3)&nbsp; the uP continue working, but after reset it goes to hard fault handler and PC goes to 0xFFFFFFFE.... WHY? </SPAN><BR /><SPAN>Thanks.</SPAN><BR /></BODY></HTML> Wed, 15 Jun 2016 19:39:04 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538651#M11709 lpcware 2016-06-15T19:39:04Z Re: Problem with erase sector.. https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538652#M11710 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by af_bln on Thu May 19 04:41:09 MST 2016</STRONG><BR /><SPAN>The first 3 sectors may be not necessary for the main code execution and only be needed while start-up.&nbsp; </SPAN></BODY></HTML> Wed, 15 Jun 2016 19:39:05 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538652#M11710 lpcware 2016-06-15T19:39:05Z Re: Problem with erase sector.. https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538653#M11711 <HTML><HEAD></HEAD><BODY><SPAN>bump</SPAN></BODY></HTML> Sun, 19 Jun 2016 01:10:30 GMT https://community.nxp.com/t5/LPC-Microcontrollers/Problem-with-erase-sector/m-p/538653#M11711 lpcware 2016-06-19T01:10:30Z