LPC MicrocontrollersのトピックRe: LPC1830+JLINK+OpenOCD? https://community.nxp.com/t5/LPC-Microcontrollers/LPC1830-JLINK-OpenOCD/m-p/531937#M10320 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by rocketdawg on Thu Feb 27 16:14:58 MST 2014</STRONG><BR /><SPAN>purchase the $20 LPC-Link-2</SPAN><BR /><SPAN>I do not think OpenOCD is supported.&nbsp; You might get it to work if you google for settings, but ...</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:20:13 GMT lpcware 2016-06-15T18:20:13Z LPC1830+JLINK+OpenOCD? https://community.nxp.com/t5/LPC-Microcontrollers/LPC1830-JLINK-OpenOCD/m-p/531936#M10319 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by TimucinAnuslu on Thu Feb 27 14:55:10 MST 2014</STRONG><BR /><SPAN>Hi all,</SPAN><BR /><BR /><SPAN>I use JLINK and OpenOCD as debugger and flasher. I connect to LPC1830-XPLORER with both these and LPC1850 config of OpenOCD. (I cannot find LPC1840 config for OpenOCD) And then reset and halt commands run successfully. But I cannot write a binary file or elf file. Which command can I use to program external quad flash?</SPAN><BR /><BR /><SPAN>Thanks</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:20:12 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1830-JLINK-OpenOCD/m-p/531936#M10319 lpcware 2016-06-15T18:20:12Z Re: LPC1830+JLINK+OpenOCD? https://community.nxp.com/t5/LPC-Microcontrollers/LPC1830-JLINK-OpenOCD/m-p/531937#M10320 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by rocketdawg on Thu Feb 27 16:14:58 MST 2014</STRONG><BR /><SPAN>purchase the $20 LPC-Link-2</SPAN><BR /><SPAN>I do not think OpenOCD is supported.&nbsp; You might get it to work if you google for settings, but ...</SPAN></BODY></HTML> Wed, 15 Jun 2016 18:20:13 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1830-JLINK-OpenOCD/m-p/531937#M10320 lpcware 2016-06-15T18:20:13Z