topic LPC11C14FBD48 in LPC Initialization Tool in LPC Microcontrollers

LPC11C14FBD48 in LPC Initialization Tool

lpcware — Wed, 15 Jun 2016 19:32:46 GMT

Content originally posted in LPCWare by jhd on Mon Feb 01 14:58:43 MST 2016
Hello,

LPC11C14FBD48 is not available in LPC Initialization Tool?

Best regards

Re: LPC11C14FBD48 in LPC Initialization Tool

lpcware — Wed, 15 Jun 2016 19:32:47 GMT

Content originally posted in LPCWare by lpcxpresso-support on Tue Feb 02 00:30:30 MST 2016
Please refer to our previous response - the situation with older LPC11 family parts is the same as the LPC12 family that you asked about previously ...

https://www.lpcware.com/content/forum/lpc122x-lpcinit-tool#comment-1149296

Regards,
LPCXpresso Support

Re: LPC11C14FBD48 in LPC Initialization Tool

lpcware — Wed, 15 Jun 2016 19:32:48 GMT

Content originally posted in LPCWare by jhd on Tue Feb 02 08:34:13 MST 2016
Hi!,

Sorry, I did not know they were old parts.

I changed the LPC54102 for LPC11C14 (to use with the CAN transceiver of the MC33908NAE) because I need at least one CAN controller. I had to remove some other device, or change the way of communication, but I hope that this will be sufficient for my needs. 1 x UART RF module, 1 x SPI to MC33908NAE, 1 x CAN controller to built-in CAN transceiver of the MC33908NAE, 1 x I2C and a few GPIO.

Best regards

Re: LPC11C14FBD48 in LPC Initialization Tool

lpcware — Wed, 15 Jun 2016 19:32:48 GMT

Content originally posted in LPCWare by R2D2 on Tue Feb 02 12:30:46 MST 2016

Quote: Javier.Hernandez
Sorry, I did not know they were old parts.

... so a better choice is a LPC15xx ;-)