topic Re: What SDK should be used to develop K70? in Kinetis Software Development Kit

What SDK should be used to develop K70?

tongjianwu — Tue, 17 Feb 2015 08:21:02 GMT

Now,I'll use the K60 and K70 to develop,K60 KSDK supported,so what SDK should I use to develop K70.

Thks

Best Regards

Jorge_Gonzalez — Thu, 19 Feb 2015 16:40:05 GMT

Hello Tong Jianwu:

Just pasting here the response to your Service Request for others in doubt.

Some legacy devices will have KSDK support, but unfortunately for K70 we do not have an estimated release time yet.

But there is K70 enablement:

1) Sample code package "KINETIS_120_MHz_SC" from the next link under “Snippets, Boot Code, Headers, Monitors, etc”:

2) MQX RTOS which fully supports K70:

Once installed you can find demos in the installation paths:

- C:\Freescale\Freescale_MQX_4_1\mqx\examples

- C:\Freescale\Freescale_MQX_4_1\demo

And there are some PEx examples:

- C:\Freescale\CW MCU v10.6\MCU\CodeWarrior_Examples\Processor_Expert\Kinetis\TWR-K70FN1M

About MQX RTOS starting tutorials next links in community are very useful:

Regards!

Jorge Gonzalez

tongjianwu — Fri, 20 Feb 2015 10:40:25 GMT

Thanks for your reply！

I will try the methods you offered above.

robertboys — Mon, 23 Feb 2015 19:40:17 GMT

Hello

Another alternative is Keil MDK. www.keil.com/freescale

The Kinetis K70 is already supported with the new CMSIS-Packs.

The IDE uVison supports P&E, OpenSDA, J-Link and Keil ULINK.

The Tower K70 is supported with two examples: Blinky and RTX_Blinky. RTX is a free ARM RTOS with source code.

You can compile up to 32K code free and there is a yearly license for all Kinetis for $745.

Bob

tongjianwu — Tue, 24 Feb 2015 00:02:39 GMT

Dear Robert.

I see it,thks!

Now I have decided to use MQX software and I am starting study the software .

Best Regards