Kinetis Software Development KitのトピックRe: FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

antoineeniotna — Sat, 14 Feb 2015 07:43:32 GMT

Hello everyone.

I purchased the FRDM-KL43Z and I try to compile the platform driver library in Kinetis Design Studio IDE using the "Kinetis SDK FRDM-KL43Z Freescale Freedom Development Board Platform User's Guide.pdf" (4.4 section).

But unfortunately, I have a problem when I reach the end of the compilation and I am stuck right now with the following error :

"Building target: /home/*******/Public/Freescale/KSDK1.0.0_KL43Z_1.0.1/lib/ksdk_platform_lib/kds/KL43Z4/debug/ksdk_platform_lib.a

Invoking: Cross ARM GNU Archiver

arm-none-eabi-ar -r "/home/*******/Public/Freescale/KSDK1.0.0_KL43Z_1.0.1/lib/ksdk_platform_lib/kds/KL43Z4/debug/ksdk_platform_lib.a" ./platform/uart/hal/fsl_uart_hal.o ./platform/uart/drivers/common/fsl_uart_common.o ./platform/uart/drivers/fsl_uart_driver.o ./platform/tpm/hal/fsl_tpm_hal.o ./platform/tpm/drivers/common/fsl_tpm_common.o ./platform/tpm/drivers/fsl_tpm_driver.o ./platform/spi/hal/fsl_spi_hal.o ./platform/spi/drivers/fsl_spi_common.o ./platform/spi/drivers/fsl_spi_master_driver.o ./platform/spi/drivers/fsl_spi_shared_function.o ./platform/spi/drivers/fsl_spi_slave_driver.o ./platform/smc/hal/fsl_smc_hal.o ./platform/sim/system/fsl_sim_hal_KL43Z4.o ./platform/sim/hal/fsl_sim_hal.o ./platform/sai/hal/fsl_sai_hal.o ./platform/sai/drivers/fsl_sai_driver.o ./platform/sai/common/fsl_sai_common.o ./platform/rtc/hal/fsl_rtc_hal.o ./platform/rtc/drivers/fsl_rtc_common.o ./platform/rtc/drivers/fsl_rtc_driver.o ./platform/rcm/hal/fsl_rcm_hal.o ./platform/power/system/fsl_power_manager.o ./platform/port/hal/fsl_port_hal.o ./platform/pmc/hal/fsl_pmc_hal.o ./platform/pit/hal/fsl_pit_hal.o ./platform/pit/drivers/fsl_pit_driver.o ./platform/pit/drivers/fsl_pit_irq.o ./platform/pit/common/fsl_pit_common.o ./platform/osc/hal/fsl_osc_hal.o ./platform/mcglite/hal/fsl_mcglite_hal.o ./platform/mcglite/hal/fsl_mcglite_hal_modes.o ./platform/lpuart/hal/fsl_lpuart_hal.o ./platform/lpuart/drivers/fsl_lpuart_driver.o ./platform/lpuart/common/fsl_lpuart_common.o ./platform/lptmr/hal/fsl_lptmr_hal.o ./platform/lptmr/drivers/fsl_lptmr_driver.o ./platform/lptmr/common/fsl_lptmr_common.o ./platform/llwu/hal/fsl_llwu_hal.o ./platform/interrupt/system/fsl_interrupt_manager.o ./platform/i2c/hal/fsl_i2c_hal.o ./platform/i2c/drivers/slave/fsl_i2c_slave_driver.o ./platform/i2c/drivers/master/fsl_i2c_master_driver.o ./platform/i2c/drivers/common/fsl_i2c_common.o ./platform/i2c/drivers/common/fsl_i2c_shared_function.o ./platform/hwtimer/system/fsl_hwtimer.o ./platform/hwtimer/system/fsl_hwtimer_pit.o ./platform/hwtimer/system/fsl_hwtimer_systick.o ./platform/gpio/hal/fsl_gpio_hal.o ./platform/gpio/drivers/fsl_gpio_driver.o ./platform/gpio/common/fsl_gpio_common.o ./platform/dma/hal/fsl_dma_hal.o ./platform/dma/hal/fsl_dmamux_hal.o ./platform/dma/drivers/fsl_dma_driver.o ./platform/dma/common/fsl_dma_common.o ./platform/dac/hal/fsl_dac_hal.o ./platform/dac/drivers/fsl_dac_driver.o ./platform/dac/common/fsl_dac_common.o ./platform/cop/hal/fsl_cop_hal.o ./platform/cop/drivers/fsl_cop_driver.o ./platform/cop/common/fsl_cop_common.o ./platform/clock/system/fsl_clock_KL43Z4.o ./platform/clock/system/fsl_clock_manager.o ./platform/adc/hal/fsl_adc_hal.o ./platform/adc/drivers/fsl_adc_driver.o ./platform/adc/common/fsl_adc_common.o ./osa/fsl_os_abstraction_bm.o

arm-none-eabi-ar: /home/*******/Public/Freescale/KSDK1.0.0_KL43Z_1.0.1/lib/ksdk_platform_lib/kds/KL43Z4/debug/ksdk_platform_lib.a: no such file or directory

make: *** [/home/*******/Public/Freescale/KSDK1.0.0_KL43Z_1.0.1/lib/ksdk_platform_lib/kds/KL43Z4/debug/ksdk_platform_lib.a] Error 1

make: Target `main-build' not remade because of errors."

Dis someone already encounter this problem ?

Thank you for your answers.

Antoine.

Re: FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

Jorge_Gonzalez — Sat, 14 Feb 2015 19:44:03 GMT

Hello Antoine Eniotna:

Are you using Windows OS? There is an issue mentioned in KSDK release notes about maximum length for file paths.

Try installing KSDK in the default directory: C:\Freescale.

Regards!,
Jorge Gonzalez

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

antoineeniotna — Sat, 14 Feb 2015 23:59:35 GMT

Thank you for your answer.

I program on linux. I tried on Windows 7 ans it works perfectly but I would like to make it works on Linux Debian. I installed again the KSDK on the root folder of Linux but I still have the same error. I really don't understand. It's quite the same configuration on the two OS.

Antoine.

Re: FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

antoineeniotna — Sun, 15 Feb 2015 09:53:48 GMT

I found and solved this issue. I hope it will help maybe other people who want to use linux to code.

It's a really common mistake on Linux which is case sensitive.

Under Kinetis Design Studio, in the ksdk_platform_lib_KL43Z4 project properties, when you check the "C/C++ Build -> Settings -> Buld Artifact" tab, you can see the artifact name is "${ProjDirPath}/debug/ksdk_platform_lib" or "${ProjDirPath}/release/ksdk_platform_lib". But it looks in fact for Debug or Release folders and not for debug and release. So you have to change the value of the folder in this text field.

I hope I have been clear.

Antoine.

Re: FRDM-KL43Z : Cannot compile the ksdk_platform_lib and get the ksdk_platform_lib.a

Jorge_Gonzalez — Mon, 16 Feb 2015 16:37:14 GMT

Hello Antoine:

I am glad you found the cause. And thanks a lot for sharing the solution, this might help others with the same situation.

Regards!

Jorge Gonzalez