SDK transition and MCU transition

dotangoldberg — Sat, 03 Jun 2017 12:50:37 GMT

Hello,

1. I'm using FRDM64F for project evaluation include application and freeRTOS using SDK 2.0 IDE KDS 3.2

A migration from SDK 2.0 to SDK 2.2 is needed

Are there major differences between SDK2.0 and SDK2.2 drivers/middleware

(For example SPI,I2C,eDMA,...) and freeRTOS interface?

2. A transition from ev board MCU MK64FN1M0VLL12 to the target MCU MK24FN1M0VLL12 is needed

Thus the freeRTOS based application from section 1 needs to be ported to MK24FN1M0VLL12

It appears that SDK_2.2_MK24FN1M0xxx12 does not include freeRTOS code

While SDK_2.2_FRDM-K64F does include freeRTOS, why is the difference?

What is the recommended way to do such a transition?

Thanks a lot,

Dotan

Re: SDK transition and MCU transition

jorge_a_vazquez — Thu, 08 Jun 2017 00:38:20 GMT

Hi dotan goldberg

About your questions;

1. No, there is not much difference between version 2.0 and version 2.2, so migration can be easily done. For changes you could check the release notes Document. you can find it in the path <SDK_2.2_K64F_path>\docs\MCUXpresso SDK Release Notes_MK64F12.pdf. chapter 9 include a list of "Change Log - Peripheral drivers"

2. SDK_2.2_MK24FN1M0xxx12 does include FreeRtos support. You have to add it in additional settings.

or if you have already selected your configuration, edit it in SDK Details

Hope this information could help you.

Have a great day,
Jorge Alcala

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Kinetis Software Development KitのトピックRe: SDK transition and MCU transition

SDK transition and MCU transition

Re: SDK transition and MCU transition