Kinetis Software Development KitのトピックKSDK and the old PEx (non-KSDK) compatibility

KSDK and the old PEx (non-KSDK) compatibility

EarlOrlando — Mon, 22 Dec 2014 18:33:53 GMT

Hi,

I'm trying to migrate a project's drivers from PEx to KSDK. I have the entire project working on KDS with PEx but I'd like to replace it for KSDK gradually. I tried to create a project with KSDK and PEx, I expected to keep the project working and only replace the peripherals drivers one-by-one but when I create the project the PEx components seems to be working under KSDK drivers.

Is it possible to keep the project working with "the old" PEx and add KSDK code gradually?

FYI, I want to use KSDK v1.1.0 for TWR-K60D100M.

Best regards,

Earl.

Re: KSDK and the old PEx (non-KSDK) compatibility

Jorge_Gonzalez — Tue, 06 Jan 2015 02:59:34 GMT

Hello Earl:

I am afraid that is not possible, in a project you can either have processor expert KSDK components (fsl_xxx) or legacy components (LDD).

So if you want to migrate to KSDK, then you have to start from scratch, creating a KSDK + PEx project, adding KSDK components and configuring them in a similar way to your old components, but keep in mind that KSDK drivers (APIs) are very different than old PEx drivers, so this will require some time+work.

I hope this helps.

Regards!

Jorge Gonzalez