Kinetis Software Development Kit中的主题 Re: LWIP TCP echo cause hard_fault

LWIP TCP echo cause hard_fault

daweiyou — Mon, 10 Oct 2016 14:48:48 GMT

Hi Guys:

here is one question for LWIP, could you help me check.

I test SDK_2.0_TWR-K65F180M\boards\twrk65f180m\demo_apps\lwip\lwip_tcpecho\freertos using echotool with big package, exceed 500+ bytes, the MCU will enter into Hard_fault interrupt, if use <=500Bytes, all package are echoed.

I think it should occur memory conflict for TCP buffer, but have no ideas since Freertos have no debug tool to trace this issue.

Re: LWIP TCP echo cause hard_fault

daweiyou — Mon, 10 Oct 2016 15:10:47 GMT

seem all LWIP examples have such issue, how could I adjust the parameters for this big package requiments? and I could bear buffer alloc failed, why the MCU failed, whether lack of memory protection?

Re: LWIP TCP echo cause hard_fault

xiangjun_rong — Tue, 11 Oct 2016 04:06:41 GMT

Hi,

Can you refer to the ticket:

https://community.nxp.com/thread/395104

it seems that the phenomenon is similar.

XiangJun Rong

Re: LWIP TCP echo cause hard_fault

daweiyou — Tue, 11 Oct 2016 11:11:06 GMT

Hi Xiangjun:

You are right, I think the issue is caused by incontinous buffer copy.Thx.

The ethernetif_input implement should be updated, this is a bug, since the code is ported by NXP, and not found in other MCU.