Kinetis Software Development KitのトピックRe: modify the ip address during running

modify the ip address during running

ninesun — Mon, 10 Oct 2016 00:22:22 GMT

Can I modify the ip address when socket task is running. for example. I had used function ipcfg_bind_staticip to set ip address at first then i build the socket task. If i receive any modify ip command(etc from serial port or network), Can I modify the IP addres use the ipcfg_bind_staticip with new ip address? Can anyone give some suggestion? thanks

Re: modify the ip address during running

ivadorazinova — Mon, 17 Oct 2016 18:24:41 GMT

Hello nine sun,

I apologize for my late response.

When you open socket on specific address and port, it´s clear that you cannot change it while it running.

First you must close the socket, configure new IP address and then open the socket.

Best Regards,

Iva