Re: Struggling to debug FTM0_CH0 on MKE02Z64

ad_d — Mon, 18 Jul 2016 15:02:20 GMT

Hello XiangJun Rong,

Both Function gets halt at while checking step by step at this condition " if(pFTM->MODE & FTM_MODE_WPDIS_MASK) /* if not write protected */" when I do next step it jumps to "default_isr".

/* FTMEN enable */

FTM_SetFTMEnhanced(FTM0);

/* update MOD value */

FTM_SetModValue(FTM0, 9999);

Please can you shed some light on this. How do I proceed am I missing any step in enabling any bits...

Thanks,

Re: Struggling to debug FTM0_CH0 on MKE02Z64

xiangjun_rong — Wed, 20 Jul 2016 03:24:20 GMT

Hi, Arti,

As I have said, pls check the interrupt source by checking the xPSR register after the unexpected ISR happens so that we can know the interrupt source. Secondly, have you set the FTM0 module clock by setting the FTM0 bit in SIM_SCGC?

XiangJun Rong

Kinetis Software Development KitのトピックRe: Struggling to debug FTM0_CH0 on MKE02Z64

Re: Struggling to debug FTM0_CH0 on MKE02Z64

Re: Struggling to debug FTM0_CH0 on MKE02Z64