topic Re: Install New Software in Kinetis Software Development Kit

Install New Software

guilhermebaggio — Fri, 29 Jul 2016 20:41:15 GMT

Efetuei o download do KSDK da FRDM-KL27Z e ao tentar instalar pelo Help > Install New Software recebo a seguinte mensagem: "No software site found at jar:file:C:/Users/Guilherme/Downloads/SDK_2.0_FRDM-KL27Z.zip!/". Como proceder?

Re: Install New Software

ivadorazinova — Mon, 01 Aug 2016 07:51:01 GMT

Hi Guilherme Baggio,

please have you installed update for KSDK 2.0?

I mean Help -> Check for Updates

New Kinetis SDK 2.x Project Wizard and click on Next and install the update

after successful installation you will see Kinetis SDK 2.x Project Wizard in File -> New

Please let me know, if you solve your issue.

Best Regards,

Iva

Re: Install New Software

lepol — Mon, 01 Aug 2016 07:52:31 GMT

Hi Guilherme,

first we need to know which version of SDK you use. If it is KSDK 1.3.0 then unpack the .zip and forward SDK_2.0_FRDM-KL27Z/tools/<exclipse_update/SDK_1.3.0_FRDM-KL27Z_1.0.0_Eclipse_update.zip> to the path. If it is a KSDK 2.0 then use the newest Kinetis Design Studio and select File - New - KSDK 2.x project.

Best regards,

Lenka

Re: Install New Software

ivadorazinova — Mon, 01 Aug 2016 08:04:11 GMT

Guilherme Baggio,

Maybe information from readme file helps you:

Installation Instructions

1. Start Eclipse/Kinetis Design Studio

2. Select the menu Help > Install New Software

3. Click 'Add' button and type Name = "New Kinetis SDK 2.x Project Wizard", Location = select: NPWforKinetisSDK2x.zip

4. Confirm installation

5. Restart the IDE

Recommended Usage:

- To download SDK 2.0 package:

1. Go to http://kex.nxp.com/ and click "Build an SDK"

2. Create a new configuration: select processor or board

3. Select SDK version 2.0 and "Kinetis Design Studio" as a toolchain

4. Use the 'Build SDK Package' button to create the ZIP file

5. Download the ZIP package and unzip it into a user folder

- To Create new project with the wizard:

1. Start Kinetis Design Studio

2. Select the menu File > New > C Project

3. Enter project name and select "Executable - Kinetis Project for SDK 2.x" and press [Next>]

4. Select where you have unzipped the SDK package from previous step and press [Next>]

5. Select board or processor and press [Next>]

6. Finish wizard

- Now you can build and debug your project

Hope this helps.

Iva