MQX for KSDK: lwevent makes errror no_one_to_run

menkooldewurtel — Wed, 04 Mar 2015 10:25:33 GMT

Hello,

with KDS2.0.0 and KSDK1.1.0. MQX for KSDK configured with PE for FRDMK64F.

In a init-function I create a event, witch is defined in a global header-file:

...

result = _lwevent_create(&sampleStateEvent, 1); //Event auto clear

...

There is one ISR (every 4096µs) for DMA Complete:

PE_IST(DMA0_IRQHandler)

{

_mqx_uint result=MQX_OK;

DMA_CINT = (uint8_t)0x00; //Clear DONE and INT flags

result = _lwevent_set(&sampleStateEvent, (uint32_t) 2);

DMA_ERQ =(uint32_t) 0x3; //start DMA Channel 0 and 1 again

}

In an Task I want to wait for the Event with:

....

result = _lwevent_wait_ticks(&sampleStateEvent, (uint32_t) 2, TRUE,0);

....

For the first pass of the wait command the Task waits till the event is set by the ISR.

Next pass MQX crashs: ASM_LABEL(no_one_to_run)

Any idea whats my Mistake?

Thanks!

Menko

Re: MQX for KSDK: lwevent makes errror no_one_to_run

RadekS — Mon, 09 Mar 2015 17:00:41 GMT

From my point of view it looks like some problem where lwevent didn’t exist in case of second loop.

Could you please check whether you call _lwevent_destroy somewhere between first and second _lwevent_wait_ticks?

It is possible that you somehow rewrite lwevent structure or kernel data by DMA transfer?

I hope it helps you.

Have a great day,
RadekS

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Kinetis Software Development KitのトピックMQX for KSDK: lwevent makes errror no_one_to_run

MQX for KSDK: lwevent makes errror no_one_to_run

Re: MQX for KSDK: lwevent makes errror no_one_to_run