topic Re: How to use UART0 for fsl_uart KSDK component? in Kinetis Software Development Kit

How to use UART0 for fsl_uart KSDK component?

thanhduong — Wed, 17 Aug 2016 01:21:29 GMT

Hi,

I want to be able to use UART0 for the fsl_uart component. When I create the component in my project, using processor expert, I am not given the option to select UART0. The only options available are UART1 and UART2. I have used the Debug Console component which gave me the option of all 3 UARTs.

How would I select UART0 for fsl_uart? Why can't I select it, if I can't.

Thanks in advance.

Re: How to use UART0 for fsl_uart KSDK component?

Jorge_Gonzalez — Wed, 17 Aug 2016 03:05:03 GMT

Hi Thanh Duong,

For UART0 use the fsl_lpsci component instead of fsl_uart. See next thread:

kl25z uart0 processor expert

Regards!

Jorge Gonzalez

Re: How to use UART0 for fsl_uart KSDK component?

chadwilliams — Wed, 17 Aug 2016 03:09:27 GMT

Check to see if the UART0 is already assigned to the Debug port.

If you have an fsl_debug_console component instance than its possible it is on UART0