topic Re: State Machine Working in MED-BPM Kinetics TWR-K53N512 in IAR in Kinetis Software Development Kit

State Machine Working in MED-BPM Kinetics TWR-K53N512 in IAR

communitycommun — Fri, 03 Jun 2016 06:29:46 GMT

It would very helpful if someone who would tell me how the state machine (State idle,state measure,state abort) gets changed while the code is been flashed.

As far as reading the PDF for med bpm i have understood that after providing the input from GUI it changes the state,else it remain in the state idle mode.

Hope someone would have worked on this before...

Thanks ..

Re: State Machine Working in MED-BPM Kinetics TWR-K53N512 in IAR

ivadorazinova — Tue, 14 Jun 2016 10:51:06 GMT

Hello,

I apologize for the late response, but I was out of office.

Please, take a look at this Application Note, Freescale Solutions for Electrocardiograph and Heart Rate Monitor Applications with the related sw http://cache.nxp.com/files/analog/doc/app_note/AN4323SW.zip

I hope this helps.

Best Regards,

Iva

Re: State Machine Working in MED-BPM Kinetics TWR-K53N512 in IAR

communitycommun — Wed, 29 Jun 2016 05:46:11 GMT

Thanks Iva dorazinov,

I apologize for late response.

I had this document before .now i have understood the code and state machine....
Thanks for the reply....