Kinetis Software Development KitのトピックRe: fsl_usb_* components missing in PE KDS 3.2 SDK 1.3

fsl_usb_* components missing in PE KDS 3.2 SDK 1.3

inorman — Tue, 10 May 2016 15:53:39 GMT

Hi, I'm trying to develop a USB CDC project on a K64 using Processor Expert in KDS 3.2 with SDK 1.3, but all the examples I see are using a fsl_usb_framework component.

My installation doesn't have any fsl components at all, have I missed a step when installing? Or do these need to be added separately?

Regards

Ian

Re: fsl_usb_* components missing in PE KDS 3.2 SDK 1.3

BlackNight — Wed, 11 May 2016 07:04:19 GMT

Hi Ian,

you need to install the SDK components from here:

<SDK installation folder>\eclipse_update\KSDK_1.3.0_Eclipse_Update.zip

In KDS, use Help > Install New Software and use the above zip file as update archive.

Erich

Re: fsl_usb_* components missing in PE KDS 3.2 SDK 1.3

therealfreegeek — Wed, 11 May 2016 08:01:33 GMT

Once you have KSDK 1.3 installed it is still not straightforward to set up USC CDC under PE, after a bit of searching I found that this was the best example and the easiest to implement and use.

https://centaurian.co.uk/2015/12/23/ksdk-usb-cdc-printf/

Re: fsl_usb_* components missing in PE KDS 3.2 SDK 1.3

inorman — Wed, 11 May 2016 08:29:01 GMT

Thanks Eric, that was the step I was missing. I found the update in

<SDK installation folder>\tools\eclipse_update\KSDK_1.3.0_Eclipse_Update.zip

Thanks you therealfreegeek, I'll follow that example.

Cheers

Ian