topic Re: Debugger Connection to FRDM-K64F Freedom Module in Kinetis Software Development Kit https://community.nxp.com/t5/Kinetis-Software-Development-Kit/Debugger-Connection-to-FRDM-K64F-Freedom-Module/m-p/507360#M5085 <HTML><HEAD></HEAD><BODY><P>If you are concerned about jumper settings and how to connect:</P><P><A href="http://mcuoneclipse.com/2015/05/11/debugging-the-frdm-k64f-with-pe-multilink/" title="http://mcuoneclipse.com/2015/05/11/debugging-the-frdm-k64f-with-pe-multilink/">Debugging the FRDM-K64F with P&amp;E Multilink | MCU on Eclipse</A> </P><P>With Segger J-Link it is the same, except that instead a Multilink it is a J-Link.</P><P>And of course the settings in the debugger are different, and different for every IDE.</P><P></P><P>But I hope this helps,</P><P>Erich</P></BODY></HTML> Fri, 12 Feb 2016 18:47:38 GMT BlackNight 2016-02-12T18:47:38Z Debugger Connection to FRDM-K64F Freedom Module https://community.nxp.com/t5/Kinetis-Software-Development-Kit/Debugger-Connection-to-FRDM-K64F-Freedom-Module/m-p/507359#M5084 <HTML><HEAD></HEAD><BODY><P>I have a FRDM-K64F Freedom Module. How do I connect a Segger J-Link to it? The User's Guide is somewhat unclear on this.</P></BODY></HTML> Fri, 12 Feb 2016 17:21:45 GMT https://community.nxp.com/t5/Kinetis-Software-Development-Kit/Debugger-Connection-to-FRDM-K64F-Freedom-Module/m-p/507359#M5084 jerrygardner 2016-02-12T17:21:45Z Re: Debugger Connection to FRDM-K64F Freedom Module https://community.nxp.com/t5/Kinetis-Software-Development-Kit/Debugger-Connection-to-FRDM-K64F-Freedom-Module/m-p/507360#M5085 <HTML><HEAD></HEAD><BODY><P>If you are concerned about jumper settings and how to connect:</P><P><A href="http://mcuoneclipse.com/2015/05/11/debugging-the-frdm-k64f-with-pe-multilink/" title="http://mcuoneclipse.com/2015/05/11/debugging-the-frdm-k64f-with-pe-multilink/">Debugging the FRDM-K64F with P&amp;E Multilink | MCU on Eclipse</A> </P><P>With Segger J-Link it is the same, except that instead a Multilink it is a J-Link.</P><P>And of course the settings in the debugger are different, and different for every IDE.</P><P></P><P>But I hope this helps,</P><P>Erich</P></BODY></HTML> Fri, 12 Feb 2016 18:47:38 GMT https://community.nxp.com/t5/Kinetis-Software-Development-Kit/Debugger-Connection-to-FRDM-K64F-Freedom-Module/m-p/507360#M5085 BlackNight 2016-02-12T18:47:38Z